Many homes in Sturgis, SD and near Fort Meade struggle to keep their heat during the winter months. Homeowners looking at Open Cell Spray Foam are usually trying to solve drafty rooms or high energy bills. Winters in the Black Hills bring very cold temperatures and strong winds. Classic Insulation Co provides Open Cell Spray Foam services for homes in Sturgis, SD, and this guide will explain how Open Cell Spray Foam works, what homeowners can do to prepare before our team arrives, and why DIY spray kits from the hardware store should not be used for a whole roof deck.
Before the Crew Arrives: Your Prep Work
Preparation makes a major difference for an Open Cell Spray Foam project in Sturgis, SD. First, clear all stored gear, holiday bins, and personal items out of the attic or off the walls we are treating. Dust and overspray can occur, so cover anything you cannot move with plastic sheeting. Pets should be placed in a quiet spot away from the work zone because compressor engines and equipment humming can stress animals. Check your electrical panels and make sure our team has clear access to the workspace. Homeowners can complete these tasks ahead of time, which saves time and helps Classic Insulation Co get your Open Cell Spray Foam project moving faster.
During the Spray: Leave This Part to Us
Open Cell Spray Foam expands very fast during application. The materials are mixed on-site through a specialized rig mounted in a trailer outside, pumped at exact temperatures and pressures. You cannot achieve this kind of chemical reaction with DIY kits from the big box store unless you want a sticky, uneven mess that cures wrong and smells for months. Our team suits up in full PPE, respirators, and protective gear because liquid chemicals are not something you want to breathe or get on your skin. Once the Open Cell Spray Foam goes up against those framing studs, it puffs up to fill every nook, cranny, and tiny gap that fiberglass batts just slide right past. It acts as a solid air barrier, though it still lets moisture vapor breathe compared to closed cell foam.
After the Application: Curing and Cleanup
Once we spray, Open Cell Spray Foam needs time to cure and off-gas. Homeowners usually need to stay out of the house for 24 hours while ventilation fans run and the chemical reaction finishes settling down. Do not touch or poke the foam while it is soft. After it hardens completely, it is safe, inert, and locked into place. You or your drywall contractor can trim any excess flush with the studs if needed, though Classic Insulation Co usually handles the cleanup of our scrap material before we pack up our hoses. For homes and businesses in Sturgis, Classic Insulation Co provides Open Cell Spray Foam services, and we always tell homeowners to check their ventilation setup afterward because once you seal a Sturgis house up tight with Open Cell Spray Foam, your indoor air dynamic changes. You might need a small HRV or exhaust strategy to keep the air fresh, especially when the house is locked up tight against a January blizzard.